Not the Answer I Expected

I called Boisvert Ford this afternoon to get an idea of when Miranda will be ready. Surprise: they just have the oil change left!!!!!!!

This means they did not waste any time since there was about 24 hours of work to do, including eight hours for paint.

Even though I could pick her up first thing, I won’t be able to since I need to go spend the day with a client. Boisvert’s sales department is open till 9:00 on Thursdays, so I can pick her up on the way home. I hope that everything looks good and that I don’t have any questions that would mean delaying the pickup to Friday.

I should be able to start the battery bank project this weekend!

The Highly Technical French-Canadian Method For Securing Furniture (some assembly required)

The filing cabinet really vexed my mother. She felt that it was just about impossible to secure it to the rig without risking that a misadventure would rip out the floor or, worse, a wall. I witnessed this summer just how much it can move, and how much damage it can make, when an idiot with no respect for his clients’ RVs parks one.

The conclusion she reached was one I had toyed with: not securing the filing cabinet, but rather wedging it in place during travel.

The end result has a horizontal piece linking the desk and the top of the cabinet, a horizontal piece linking the wall behind the desk and the bottom of the cabinet, and a vertical piece blocking the drawers. There is also some trim on the bottom of the cabinet to further discourage it from moving.

I think it’s time for a picture. 🙂

Everything that touches the desk, cabinet, or printer drawer has padding to hopefully prevent scratches.

Here’s a closeup of the vertical section with the drawer pieces:

My mother wanted the whole thing to be dismantleable and easy to store and she wanted to make sure everything was wedged in super tight, hence the use of the cedar shingle wedges.

I’ll know in a few days if this works or not!

The HP OfficeJet 8600 Inkjet Printer Series: Perfect for RV Boondocking

For the last four years, I’ve only been able to print when I’m on hookups since I was using a laser printer. Laser printers are incompatible with a boondocking lifestyle unless you have a crazy solar setup or are willing to run the genset to print; they just require too much power. I haven’t really missed being able to print and was only once in a situation where I had to run to a print shop to print something.

But my new line of work is going to require me to print. So I found myself tasked with finding the impossible: a professional-grade inkjet printer with low energy consumption and low ink costs. Would you believe that such a thing exists?

Look no further than the HP Officejet 8600 series multifunction printers. There are three models, the Pro, the Pro Plus, and the Premium. Being multifunction, they also fax and scan, making them suitable for a small office setup.

HP Officejet 8600 (Premium) Multifunction Inkjet Printer

What these printers all have in common is how cheap they are to run as well as their energy efficiency.

According to PCMag (and a number of other sources), the cost per page of the HP Officejet 8600 series is 1.6 cents for black and white and 8.2 cents for colour! This might actually be less than the cost per page of a laser printer!

As for energy consumption for the HP Officejet 8600 series, the peak capacity is 34 watts and standby is 6.63 watts. On 12V power, that’s just a maximum of 2.8 amps and 0.6 amps for standby. Compare that to an average laser printer with a maximum consumption of 634 watts/53 amps and a standby of 35.1 watts/3amps!

The only negative for me of the HP OfficeJet 8600 series is that the printers weigh 26lbs. That said, the weight is comparable to that of my old Brother laser printer, so I know I can secure the new printer with a couple of new thumb grips. And it won’t affect my carrying capacity!

Now, the difference in the three models. There are actually not that many. The Premium and the Pro Plus have identical specs but the Premium has two trays. If you have to go often between different kinds or sizes of papers, the extra tray is very useful. The Pro is a little slower (32 ppm per minute vs. 35) and it allows for fewer pages in auto feed (35 vs. 50).

All three models allow for wireless networking and support Airprint, for direct printing from an iPad, iPod Touch, or iPhone.

This printer has one quirk I have never seen on a printer. It’s not glossy black or putty grey, but rather a dark bronze. Several reviews I’ve read have put that as a negative. For me, that’s another bonus! 🙂

The entire line of HP OfficeJet 8600 printers is on major sale at Staples in Canada until August 16th. The Pro is selling for $180 (save $50), the Pro Plus is $259 (save $70), and the Premium is $330 (save $100). So if you’re a professional looking for a printer that is compatible with an off-grid lifestyle, there’s no need to shop around.

 

Major Chaos For Major Improvement

WHEW. My mother and I are done with the last bit of the hard core renos we planned for the summer. Now, we have all the little details to finish up as well as the inverter and battery monitor projects. So I really don’t have much to show off just now, but some is better than none!

First off, my new desk top. OMG. I didn’t even know I needed this until my mother informed me that I did:

Hopefully, third time will be the charm for the desk. 😀

What we did is cover the existing desk with two layers of 1/2″ MDF glued together (no 1″ sheets available). We then covered the new work surface with cloth-backed vinyl. The colour is delicious. It’s sold as ‘plum’ but looks like chocolate in artificial light and wine in natural light. It contrasts perfectly with the green and the red tones can be found in the flowers of my curtains. The lady at the fabric store told me three times that I had made an excellent choice of colour and she was right!

I am worried about kitty claws, so I’ll be covering empty swaths of the desk with a mat or blanket.

There is now a gap between the top of the little bookcase and the new desk and I have a wooden ‘in box’ that fits perfectly there. I’ll show it off once it has a handle and latch. There is also a gap at the other end of the new desk top, at the end of the mattress:

My mother thought that my extension cord management idea was good, so she improved the idea, building a new bed frame with gaps for holding cords. We covered it with plastic trellis to give the mattress a flat surface to lie on. The trellis is rigid enough to be a good surface, is light, and will wear well. It was expensive, but the best product for the job.

At the end of the mattress, you can see a wide plastic drawer. I picked it up at the Ottawa Solutions store (I’ve never been to a Container Store, but I suspect it’s the same idea). The drawer spans the whole width and depth of the hole and is going to be used for archival storage (ie. old report cards, greeting cards, correspondence, and the like). I used to have all of that in a basket in an overhead cabinet, but this is a much better use of space. Over top of the drawer is just enough space for storing my laptop for travel.

Also at Solutions, I picked up what I needed to stop swearing each time I open the door to my wonderfully spacious medicine cabinet:

I like to open the door when I pass and just smile at how pretty and organized the cabinet is now. 🙂

The cabinet is well designed in that it has a lip on the bottom of each shelf, but everything would tumble out when I opened the door. I wanted containers that would fill the space and be retained by the lip.

So I brought the measurements for the shelves with me to Ottawa and went through the store until I found the cheapest items that could fit in the space. The silver containers were deeply discounted office supplies. There were three of the big ones left and without any real thought, I grabbed four of the narrower ones. Got home and discovered I still had a gap, perfectly filled by my brown basket. I couldn’t have designed this space more perfectly! Every space is sorted by use and everything is so apparent. No more opening up a tube of toothpaste when I already have one started.

To whet your appetites a little, my wonderful new dresser is now functional and just awaiting finishing details. The wall in the living room is up, but the door needs some catches and both need paint. There’s a new water pump access panel in the entrance stairwell, but it too needs paint. The filing cabinet still needs securing, but we think we have the solution. The office and dressing room both need paint touch ups. I also need tons of trim along the floor, but that will come with the electrical work.

My home was fine the way it was, but it is now ‘much better’ (said in my mother’s hilariously exaggerated French Canadian accent!).

Working Towards Major Improvements

My mother and I started to do some work on the rig this weekend. She muchly expanded our to do list. The end result is going to be blog worthy awesomeness at some point, but is only half completed at present.

One project that we did finish were the curtains in the study. Yes, I already had curtains in the study, and lovely ones at that, but only from the inside. They didn’t look finished on the outside and were, according to the US customs official in 2011, a dead giveaway that my rig was a full-time home. So we lined all the curtains with white material to make them look uniform around the rig and moved the rods up higher so that they don’t show from outside, like so:

I wish I’d thought to grab a before pic, but that’s me. 🙂

Next, the hideous, never meant to be permanent, cloth dresser is GONE!!! WOOHOO!!!!!!!!!!!

However, due to a slight and easily fixable, measuring error, I can only show you this teaser of my new wonderful, everything I hoped for, dresser:

I have gone from six huge drawers to nine smaller drawers and I look forward to organizing my clothes this evening. 🙂

We also started to get the filing cabinet secured, a job that surprisingly has my mother stumped.

And I sort of have a new desk! This is one project that I would never have thought I needed done, but which my mother zeroed in on right away because of my the new client I’ve picked up. I’m not sharing an pics of that till the job is completed because the awesomeness of the end result will be diminished by showing an in progress pic. 🙂

We’re short on time, but after finishing all of these projects, we have some major work to do in the living room, including building a wall, a door, and possibly even a closet.

And at some point, we are going to get that new inverter installed. I did some research and discovered that a 1,000W inverter needs really small gauge wiring, ideally no. 2, so that will require making an even bigger hole in my living room floor. Since I’ll be making one hole, I agree with my mother that I might as well make a bunch more and, well, the end result will be awesome.

I just hope we’re as good at finishing projects as we are at planning them. 😀

(I’m off to Gatineau on business tomorrow, so I may not be able to blog again until the end of the week.)