Month: March 2010

by

Adding Some Trim to the Dishwasher Cabinet

I had to stop early this afternoon because it got very cold very quickly in the workshop, but the progress for today makes me optimistic that I can make the dishwasher cabinet look nice.

This is the kitchen side of the counter. What a mess!

This is the kitchen side of the counter. What a mess!

A bit of paneling hides the side of the mess and a topper of trim takes care of the rest. Imagine when it's all painted the same colour!

A bit of paneling hides the side of the mess and a topper of trim takes care of the rest. Imagine when it’s all painted the same colour!

I had planned on putting a bit of a ‘lip’ on the bottom of the cabinet to further discourage things from sliding out, so the trim is both pretty and functional.

The dining room side is going to be a bit trickier in that I need to keep the bottom panel open for access, but I think I’ll do something similar, only with magnets instead of nails.

Now, what would I do for eight solid hours of weather I could actually work in….

by

Dishwasher Counter Progress… For REAL!

It was too wet, yet again, to work outside today, but, at least, it was warm enough to do so in the workshop. Mr. Neelix wasn’t going to let me get any work done unless I got him cat food RIGHT AWAY (even though his bowl was still full) so off I went to check out the spoils at Windsor Plywood and Home Depot. Unfortunately, I came home empty-handed. So, I decided to use what I had on hand, even if it was planned for another project.

Since I couldn’t work outside, using the table saw to cut my panels was out of the question. It’s just too tight inside the workshop to do so. I have three scars on my wrists to remind me of what power tools can do to you when you are working in ideal circumstances and warn against trying to ‘make do’. I therefore pulled out my trusty friend:

We have done A LOT of work together! Sure, cuts with a jigsaw aren’t as razor straight as you can get with a table saw, but I wasn’t risking any limbs, so it was worth it.

Two more panels cut, I did a mockup on the base to make sure the dimensions were okay:

Which brings me to an epiphany I had in the middle of the night. It’s no wonder I’m exhausted all the time, my brain never shuts off! The thought was related to the space behind the drawer:

I was just going to write it off as wasted space, but realised in the middle of the night that I could make that space accessible from the side of the kitchen and use it for storing oversized cutting boards and the like. Nice solution, but I’m not sure it was worth waking up for at 4 in the morning!

And this is where I paused for lunch:

I’m out of angle brackets, so I need to take apart some valances. That done, I will install the final two panels; a shelf that will go over the drawer and the one that will be against the wall.

Before I bring the unit into the rig and install it, I will need to pretty up the base with some trim.

Once the unit is installed, leveled, and pretty, I’ll work on doors.

It sure feels good to have something done today!

by

Securing RV Furniture

I’ve been doing some research to gather my options for how I’m going to secure my new furniture, especially the rocker I don’t have yet but am actively shopping for. I also have the stool to worry about, but I think that I’ll start by just laying it flat on the ground. I really want to avoid bolting my new rocker/recliner to the floor and like the idea of using eyebolts and bungee cords as found in the article How to Keep Loose RV Furniture From Flying When You Hit the Brakes.

This article also includes a video about removing the dinette, which confirms to me that I did the right thing by building up and around the dinette bench containing several systems. I don’t agree with the part in the video where the guy says to avoid furniture on wheels in an RV. I can’t imagine having a non-rolling computer chair! The trick is to simply turn the chair onto its side and lay it on the ground. Even when I’ve had to hit the brakes, the chair has never gone far.

I’ve been scoping out Craigslist for the rocker/recliner model that I want. While I’ve seen many in my price range, they were either gone by the time I emailed or covered in the wrong material (I want vinyl or leather vs. microfiber or suede). I’m looking for something like this:

I found one for the very tempting price of $20, but it was covered in microfiber and didn’t have the footstool while one that was $75 and had the right fabric and colour as well as the footstool was snapped up immediately. I’ve seen many more! Craigslist isn’t used that much in the Comox Valley so seeing such an abundance of them for under $100 (including the footstool) tells me that I should check the ads for Vancouver when I head back to the mainland. It’s not a huge priority, but I would love to once again have a comfy reading, cross-stitching, and knitting chair, especially in a separate room from the computer!

This is probably where I should point out that I am pretty much allergic to buying new furniture. I make the odd exception for cheap assemble-it-yourself stuff but when it comes to things like sofas, chairs, and nice cabinets, I prefer to get something used. I have a lot of reasons for this and money isn’t really the first consideration. I like things that are slightly broken in since I have cats. I also find that there is more variety in the used market than there is in the new since I’m not fighting trends. And, yes, the costs are usually a lot better.

by

Time Change

The spring time change is always hard; I hate losing that hour!  I make it a point to change the time before bed and to go to bed as early as possible. Yesterday, that was 11PM ‘real’ time, or midnight ‘fake’ time. When I woke up at 10 this morning, I had to remind myself it was actually 9 and that I was up at that time three days in a row. Not bad for a night owl. 🙂

by

Surrendering to the Weather

Stormy again today. I’m not even going to try to work on any projects. Instead, I’ll focus on putting in several hours at my contracts and getting up to date with my company’s bookkeeping, all tasks that I have been neglecting in favour of just getting these renos done.

I’ve put myself on a slightly earlier schedule and it’s supposed to be gorgeous out when I return to work (growls), so I should be able to put in an hour or two of renos before heading off to work. Not an ideal situation, of course, but this weather removes a lot of choices.

Well, the coffee’s ready and my neighbour’s banana bread is calling, so off to work I go. There are definitely worse ways to spend a day, even if you wish your dishwasher counter was done already! 😀