While I have finally managed to charge my 17″ Macbook Pro through my RV’s whole house inverter, it’s a terribly inefficient way to do it. I researched 12V chargers and found only cheap Asian models that I knew wouldn’t work well, if at all. But in my research, a name kept popping up and I finally decided to look it up. That name was Mikegyver.

This guy offers a number of DC charging solutions that actually work for Macs. How? He hacks the Apple charger brick to connect the magsafe cable to a 16.5 DC charger. Sound confusing? It was to me and I’m quite knowledgeable about all things Apple as well as DC electricity. I went through the site and I just couldn’t make the information connect.

So I finally emailed Mike and he was kind enough to answer my questions until the light bulb went on. I knew immediately that I wanted to do a write up about his system with pictures that would leave no question as exactly what it’s all about. The following pictures are of the Compact Mikegyver Power Travel Kit w/USB port.

Mike uses real Apple chargers (more on that below the photo gallery). This is an 85W model for a 17″ Macbook Pro.

The DC charger has a USB outlet that actually works for charging an iPad, iPhone, or iPod Touch. It has a male end.

He snips the magsafe cable from the Apple charger and puts a female plug on it. The new connection is solid.

You can then plug the DC charger into the magsafe cable, bypassing the AC charger.

The AC charger has a male plug.

You can plug the AC charger into the magsafe cable and charge with 120V power in a standard AC outlet.

A Macbook Pro needs 16.5V to charge. The AC cable will take the 120V power from the grid and convert it to 16.5V. In an RV on an inverter, you start with 12V that become 120V through an inverter that becomes 16.5V through the AC charger. Using Mikegyver’s solution, your 12V are immediately converted to the 16.5V the computer needs. This is much more efficient!

To purchase this system, there are a few options. I went with one of the more pricey ones, which was to order from him a brand new Apple brick to be hacked, at a cost of $160.90 plus shipping. But if you can spend a few weeks without your brick and have him convert it, the cost is just $69.95 for the labour and DC charger. There is also an exchange option where you can send back your brick in exchange for the newly converted one. This is only possible if you have the newer bricks with an L-shaped magsafe. I don’t and couldn’t be without my brick for a few weeks, so I just ordered the whole kit and kaboodle. So I now have an extra brick in case the first one fails.

My number one question once I understood the system is why not just send the DC charger plus magsafe, forget the brick, and drop the price? The answer is so obvious I’m embarrassed to have asked it. The value in this system is in the magsafe cable, not the AC charger.

This DC charging solution for a MacBook Pro is as close to an Apple product as you can get and I can’t recommend it too highly for RVers who spend time off the grid.

The entire team at Mikegyver is professional and helpful. Unfortunately, there were a several problems with the processing of my order. I can’t hold it against them because they made it right and then some, plus their product works! They might be the only folks offering this solution, but you’d never know it from the way they treat their customers.

All right folks, I think we can say that Rae’s battery bank and whole house inverter set up is operating at full capacity!!! I’m sitting in partial sun with about 12.8V only on all the various monitors and I am not only charging my laptop, but also using it! The inverter does beep when the clouds get really heavy, but just for a second! I still think the DC charger I’m getting tomorrow is my best solution, but I feel soooooooo much better than I did yesterday!

I really want to thank everyone who has given me input on my battery upgrade woes. Every single comment I’ve gotten has given me just a little insight into why things weren’t working correctly, how to fix it, what to expect in terms of performance, etc. I really had all the knowledge I needed and the right tools. The problem was with the execution. Make good connections, folks!

Croft asked me how long I plan to stay here and what my plan is if the weather goes bad. I was able to go 13 days on my old batteries with fewer amp hours in mostly crappy cold super overcast conditions. Right now, I’ve got the rig plugged into the whole house inverter and am running the fridge and charging the computer, for a total of 2.8 amps going out. I have 0.9 amps coming in. My monitor is telling me I could run like this for another 43 hours before depleting my batteries. When I was just running a light last night, I could have kept going for 150 hours before depleting my batteries.

So I have a lot of reserve capacity for cloudy days, especially since I don’t have to run the furnace. I suspect I will run out of water and holding tank space before I run out of power. I can haul water from the icky public bathroom and dump grey water there and I can go about six weeks on my black tank. So unless the weather goes really, really bad, I should be able to last four weeks here as I had hoped to do.

This experiment is going to serve me well since I’ve decided I’d rather not put much money into my property next summer. So I’ll leave here knowing if I stand a chance of lasting the summer without plugging in.

YAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAY. My battery bank has been operating as I would have expected it to for more than 12 hours now!!!!!!!!!!

Late yesterday afternoon,  after some helpful comments by reader Dave, I took the wiring apart again, recleaned with baking soda, applied new gel, and tightened everything.  While doing this, I noticed that the connection between the two batteries wasn’t as tight as it could be. That alone could have explained my problems!

Voltage last night never dipped below 12.3, no matter what I was doing, and rested at 12.5 when I had nothing but the fridge and a light on. I had a light on all evening and it would flicker when the water pumped kicked on, but voltage readings remained constant. Just for kicks, I turned on the inverter and vacuumed the hall carpet. No problem. The monitor was correctly registering my usage. When I got up this morning, I was reading 12.5V and no outgoing amps since I was already charging. Perfect!

The computer continues to be an issue and I remain convinced that the problem is not my system. I’m in the truck right now with the engine running waiting for full sun to hit my panels. When that happened yesterday, I was able to get a FULL charge out of my computer while running the whole house inverter and doing other things. My DC charger will be here tomorrow and life should be able to return to normal for me.

Being up early again this morning and not wanting to start the truck that soon, I took my coffee and went for a long walk on the beach. Then, had a pleasant chat with my neighbours who, in part, wanted to let me know they were moving 30 feet down the beach and it had nothing to do with me. How nice of them. 🙂 They commented on how people down here are so much friendlier than folks staying in RV parks in southern BC, something I wholeheartedly agree with.

I want to stay in today and get started on some painting. It’ll be nice to not go anywhere and, at some point, go play in the surf. 🙂

The time has come to truly test my new electrical system. I’m starting with a full charge, my batteries are watered, and I’m looking at a long stretch of warmth and sun. This is going to be my first attempt to truly live off grid on a fairly normal routine. The only thing missing is the DC charger for my Mac and that will be here Saturday. So I only have about another hour on my Mac tonight and an hour total tomorrow, then I’ll need to take it for a drive on Friday. Hopefully, the DC charger will work and I will have enough power to use my Mac as much as I need to!

One thing I am going to aim for is to live as much as I can by the sun. The days are short, so that won’t be super feasible, but I am going to try as much as possible to restrain my computer usage to daylight hours and use my iPad in the evenings.

I tend to spend my evenings sitting in the dark when I boondock, but I’m pretty sure that’s ridiculous with my set up. So I am allowing myself one LED light on in whatever room I’m and will see if that’s sustainable.

Finally, I have a ton of projects to do that do not require power but do require good weather. So I will attempt to spend a little less time at the keyboard and a little more time on other things while I am here, in addition to road tripping around the environs.

Well, methinks it’s time for dinner. Spinach salad, bratwurst, and sweet potato fries anyone?